We normally dig out approximately 100mm to 125mm, (4" to 5"), depending on the ground.
We then put in the timber frame. Lay the fibreglass membrane. And start to put in approximately 100mm of Type 1 MOT (crushed rock).
After we have compacted the Type 1 MOT, we then add 20mm to 30mm of Sharp Sand. This is also compacted and then screeded off, ready for the next stage.
The 3D Artificial Grass is then fitted, very similar to a carpet using knee kickers and galvanised air staples.
Here is the end result. A beautiful, low maintenance 3D Grass.
Web ViewMobile View